Interesting idea - a motion sensor for tennis rackets, to measure and help improve various strokes. Would love to see the basic idea applied to a vast range of sports and activities.
A bit of video will give you an idea of the size and operation of the device :
NB : We've recommended a number of books, DVDs & pieces of equipment over the years. Here's the complete list :
straighttothebar.com/articles/reading.
I'm constantly amazed at just how much my training is influenced by the people on this site. Whether you're looking for a new piece of equipment, an unusual exercise variation or just an idea of how others approach things, you'll enjoy these :
Gem From The Vault : Evolution of Sandbag Training Part 2
Looking At : Aug 27, 2017Over to you. I'd love to hear what you think : leave your comments on the above articles, and share them with your friends/colleagues/clients and so on.
NB : If you're keen to do a little fitness writing and would like to submit your own piece for Straight to the Bar, get in touch.
Looking for a challenge? Try a few of these.
We're still finalising the details for this week's discussion. I'll post them on the blog (and Twitter, Google+ etc) shortly.
In the meantime, take a look at some of the previous episodes of the show - (there's an example below, and a full list here). And if you've got any questions or comments on the various topics discussed, we'd love to hear them. Just leave a note below the video.
NB : if you'd like to take part in a future episode - either as an interviewee, or as a guest host - just drop us a line. Love hearing how everyone else trains.
Each week we publish a number of tips and techniques via Twitter, Google+, the blog; and now the newsletter. Wherever you are, there's always a way to improve what you're doing.
In the article Fight Fat With CLA from eVitamins, Derek noted the value of getting some quality meat in your diet. One of the key factors is to keep an eye out for things like 'grass-fed beef'; another is to purchase from local sources whenever possible.
Jeff Marraccini explains :
Scott, I also look for local sources. Even grass-fed meat coming from far away likely has more risk of being exposed to excessive heat, cold, or other environmental conditions. Unfortunately, it is not always possible so I have to compromise from time to time.
Great point.
Interesting idea - a motion sensor for tennis rackets, to measure and help improve various strokes. Would love to see the basic idea applied to a vast range of sports and activities.
A bit of video will give you an idea of the size and operation of the device :
NB : We've recommended a number of books, DVDs & pieces of equipment over the years. Here's the complete list :
straighttothebar.com/articles/reading.
Rather than trying to explain how it works, here it is in action :
Good stuff Bret, looks great.
Ideal for hiking/biking/training expeditions, the harness is designed to hang on to the club on the way there. As for the club itself - fill it up with water/sand/lead shot (up to 70lb worth) and get to work. Perfect.
The Immortal Strength Harness and Water-Fillable Club.
I'm constantly amazed at just how much my training is influenced by the people on this site. Whether you're looking for a new piece of equipment, an unusual exercise variation or just an idea of how others approach things, you'll enjoy these :
Gem From The Vault : Jaw Lifting - What, Why and HowLooking At : Aug 20, 2017Over to you. I'd love to hear what you think : leave your comments on the above articles, and share them with your friends/colleagues/clients and so on.
NB : If you're keen to do a little fitness writing and would like to submit your own piece for Straight to the Bar, get in touch.
Nice one.
We're still finalising the details for this week's discussion. I'll post them on the blog (and Twitter, Google+ etc) shortly.
In the meantime, take a look at some of the previous episodes of the show - (there's an example below, and a full list here). And if you've got any questions or comments on the various topics discussed, we'd love to hear them. Just leave a note below the video.
NB : if you'd like to take part in a future episode - either as an interviewee, or as a guest host - just drop us a line. Love hearing how everyone else trains.
Each week we publish a number of tips and techniques via Twitter, Google+, the blog; and now the newsletter. Wherever you are, there's always a way to improve what you're doing.
When Jeff Wilson was training for the Soda Can Crush (video below), he quickly realised that his usual training approach wouldn't work. For one thing, you can't progressively crush a can of soda.
In the article Unusual Goals Require Unusual Measures, he explains exactly how to tackle something like this. Here's a snippet to give you the basic idea :
I knew that without actually being able to accomplish the feat that my training would have to take a drastic turn from what I had become accustomed to over the years. The seemingly supplemental exercises of my workouts would now become my core movements.
I scoured my repertoire (as well as the training logs of top gripsters world-wide) for hand, wrist and grip exercises to find those that closely mimicked the movement I would use for the crush - and I came to the conclusion that the final crush of an unbraced bend was strikingly similar. With some alterations to my particular style of bending I knew I could get huge carryover to the soda crush. I upped my bending frequency a bit and focused on generating as much power as possible through the final crush down as I could with each piece of steel I attempted. During my bending sessions I used high volume, isometrics and pre-kinking steel that was a little out of my league, but I didn't want to bend too often because going too overboard with unbraced bending can potentially set you up for some pretty nasty injuries. I knew that I also needed movements that I could safely perform on a very regular basis that would have big carry over to the can crush, while having very little risk of injury in order to accomplish my goal in a timely manner.
And the feat itself? Over to Jeff :
Love it.
Ideal for hiking/biking/training expeditions, the harness is designed to hang on to the club on the way there. As for the club itself - fill it up with water/sand/lead shot (up to 70lb worth) and get to work. Perfect.
The Immortal Strength Harness and Water-Fillable Club.
Rather than trying to explain how it works, here it is in action :
Good stuff Bret, looks great.
Was talking to someone about this just a few hours ago - the Concept2 BikeErg. Looks good.
I'll be trying it out as soon as it's available here (early next year). In the meantime, a bit of video to show you what's on offer :
I'm constantly amazed at just how much my training is influenced by the people on this site. Whether you're looking for a new piece of equipment, an unusual exercise variation or just an idea of how others approach things, you'll enjoy these :
Gem From The Vault : Lift Weights? So What!Looking At : Aug 13, 2017Over to you. I'd love to hear what you think : leave your comments on the above articles, and share them with your friends/colleagues/clients and so on.
NB : If you're keen to do a little fitness writing and would like to submit your own piece for Straight to the Bar, get in touch.
Nice one.
We're still finalising the details for this week's discussion. I'll post them on the blog (and Twitter, Google+ etc) shortly.
In the meantime, take a look at some of the previous episodes of the show - (there's an example below, and a full list here). And if you've got any questions or comments on the various topics discussed, we'd love to hear them. Just leave a note below the video.
NB : if you'd like to take part in a future episode - either as an interviewee, or as a guest host - just drop us a line. Love hearing how everyone else trains.
Each week we publish a number of tips and techniques via Twitter, Google+, the blog; and now the newsletter. Wherever you are, there's always a way to improve what you're doing.
When it comes to the squat, Powerlifter Rick Walker clearly knows what he's talking about.
If you've ever tackled this wonderful exercise yourself and felt that your form just didn't feel quite right, check out his article Addressing Weaknesses in The Squat. To give you an idea of what it's all about, here's how he corrects one of the more common problems found in squat technique - the simple act of Bending at the Knees First.
Over to Rick.
This is a common problem among many beginning squatters as the lifter is usually afraid of falling backwards with the weight. Instead of sitting back first, the lifter will bend at the knees to go down. This causes the knees to go forward well over the toes and often times causes the lifter to go up onto their toes in the hole. This is not only dangerous, but you are limiting how much you can squat. The pressure on the patellar tendons in this position is tremendous and leads to big time problems down the road.Yes, some lifters, especially Olympic lifters, can adapt to these kinds of stresses from having their knees that far forward.
However, the goal here is to improve the squat and move more weight, and that will be accomplished by sitting back into the squat.
How to fix it
The lifter must learn to sit back and not down. This can take a long time to get them to do, and even longer to get them to do it under maximum loads. I start all newbie squatters on a box.
I use a very high box and a very light load, usually the empty bar with some light JumpStretch© bands attached for tension. The basic commands I give are for the lifter to sit back like he is searching for a chair that is behind him. Once the lifter can get down to the high box by sitting back, I lower it an inch and start all over. Eventually the lifter will be able to sit back to a parallel box and the movement will become second nature.
Another possible reason for the lifter's inability to sit back is hamstring strength. If the lifter has weak hamstrings, he won't be able to sit back into a squat without falling. It gets much worse as the weight increases. To address this, get the lifter on the glute-ham machine pronto!
This is the best way to bring up lagging hamstrings and prepare the lifter for handling more weight in the squat correctly. I have also found Romanian Deadlifts and reverse hypers to be effective for improving the sit back portion of the squat.
And yes, I can assure you that it works. Cheers, Rick.
Was talking to someone about this just a few hours ago - the Concept2 BikeErg. Looks good.
I'll be trying it out as soon as it's available here (early next year). In the meantime, a bit of video to show you what's on offer :
Rather than trying to explain how it works, here it is in action :
Good stuff Bret, looks great.
Very interesting combination - a smartphone-connected otoscope which makes use of artificial intelligence software to help you understand what you're looking at. Promising indeed.
Look forward to learning more, particularly the online storage and sharing aspects. And of course, how well it integrates into other health monitoring tools and services.
The HearScope Smartphone Otoscope.
